Surfboard Lost El patron

The Lost El patron is Matt Biolos personal surfboard. It’s easy to inflate any model to larger dims, but another thing altogether, for it to remain nimble, responsive and forgiving.  For me, this board does just that.  Like so many of us, I’ve long since felt relegated to riding Hybrids, or Fishy, wide nose, lower rockered boards.  Crowds, getting older, a little too much good living (along with a few too many extra lbs.) as well as the fact that I never was a Pro, or a hot shot surfer, have combined to make it difficult to continue riding modern Pro-formance-shortboard designs.  With the El Patron’, I feel I can once again enjoy riding this type of board.

El Patron’ allows me to confidently navigate a crowded line up and surf at the best of my personal ability.

El Patron’ is primarily based off of a couple higher volume (wider/thicker) quivers built for Kolohe Andino, where he demanded they “still carve and turn like a thinner board”. Featuring a very conservative, low entry rocker and generous, accelerated tail rocker, but blended with a no concave nose area to the shallowest of a single concave, fading to a slight vee through the fins, and back to flat out the tail.  This bottom contour allows effortless drive, and glide, while importantly negating the high volume, and lets the rail easily engage and roll into the water.  3D surfing on a thick, wide board. Less concave/More volume: This is the “magic” of El Patron’.  Because El Patron’ is designed thick, we employ another trick…a 1/3 thinner stringer!  By using a 2ply stringer, instead of 3ply, we retain similar flex patterns of a thinner board. This keeps El Patron’ feeling flexy and forgiving, rather than being a big stiff plank…and breakage is not much of an issue with a board up and over 2.75″ thick.

Construction:

Pukas surfboards are made in the Olatu factory, in the Basque country. Olatu owns the brand Pukas and builds for two big ones: Lost and Al Merrick. Polyurethane foam core, Silmar polyester resin and Hexcel fiberglass. Great finishing and exceptional expertise.

Painting options/dyed resin:

You can choose this option in the drop-down menu. Send us a drawing or specify the color you want.

Have a look at lost designs on lostsurfboards.net. If you want one of these, choose the suitable painting option and fill references and color in the ''personnalization" tab. 

Custom size:

You can choose the width, length and thickness of your board. Click on ´custom´in the drop-down menu and indicate the size you want in the tab "Product Customization".