Categories
With the shaper malibu kit you can make yourself a mini-malibu surfboard, you have all the necessary materials:
- 1 foam Bennet-Dion Mini-Malibu
- 6 meters of 4Oz glass fiber with a width of 68.5cm (27 ''), from the Aerialite or Hexcel. For a more robust lamination you can also the reinforced version, with 6 meters of fiber of 4Oz and 2 meters of 6Oz. You will get a more robust board but a little heavier.
- 5 Kg of polyester resin Hegardt H72-UV or 5Kg of Hegardt H72 polyester resin with PMEK catalyst
- 125 Ml of paraffined styrene
- 420 Ml of glass micro-glass
- The keel fixing system. You can choose between the 6-stop system Eurofins, FCS X2, FCSII, FCS Fusion or Futures Fins.
- 1 Eurofin leash plug
In the "Customize your product" tab, you can specify:
- The color of Eurofin plugs. If you do not tell us anything, we put them black, but you can choose between Blue, Red, Gray or Bone, both for the inventive cap and for the keel plugs.
- The angle of the plugs, if you choose FCS Fusion or FCSII. By default we put those of 5 degrees, but you can request those of 3 or 9 degrees.
Pre-Shape | No (Gross Blank) |
Type | Mini-Malibu |
Volume range | Between 45 and 50 litres, Between 50 and 60 liters |
* required fields